Flexible solar panel

China flexible 375w MWT Mono Perc pv module solar panel

This 375W flexible Solar panel customized design for different scenarios and easy installation and convenient transportation with lower cost.

  • Item NO.:

    SKE375QHES
  • Lead Time:

    1-2 weeks
  • Product Orgin:

    CHINA
  • Shipping Port:

    SHANGHAI , CHINA
  • Payment:

    T/T , L/C
  • Product Detail

China flexible 375w MWT Mono Perc pv module solar panel

The 375W flexible Solar panel adopt light and thin design. Ultra-thin silicon wafers with advanced organic polymer encapsulation materials, minimum bending radius reach 0.30mm, fit all kinds of curved surface perfectly.

Ultra Flexible 370~375W flexible Solar panel


Product Characteristics:

Mechanical Characteristics

Installation Module Dimension (L×W×H)

1840mmx1040mmx2.5mm

Weight 5.7kg

Back material

Back Sheet(white)

Cell (quantity / material / type / dimensions)

126(21x6) / Mono / Half-cell

Encapsulant

POE

Frame None

Junction box(protection degree)

IP68

Cable(length/cross-section area)

Customizable / 4mm2

Connector MC4 Compatible
Bending radius 0.3m


Product Parameter:

Type SKE375QHES

Electrical Characteristics (STC*) :

Max-Power(Pm) 375
Power Tolerance 0 ~ +5
Max-Power Voltage(Vm) 35.3
Max-Power Current(Im) 10.62
Open-Circuit Voltage(Voc) 42.8
Short-Circuit Current(Isc) 11.23
Effective Module Efficiency(ηm) 21.2

Electrical Characteristics (NMOT*) :

Max-Power(Pm) 282
Max-Power Voltage(Vm) 33.2
Max-Power Current(Im) 8.49
Open-Circuit Voltage (V) 40.3
Short-Circuit Current (Isc) 9.05
Max System Voltage (V DC) DC1500V(IEC)

Operating Temperature(°C)

-40°C ~ +85°C

Max Series Fuse Rating

18A

*STC: AM=1.5, Irradiation 1000W/m², Module Temperature 25℃    Power Tolerance ±3%

*NMOT: Irradiation 800W/m², Ambient temperature 20℃, Wind Speed 1m/s


Product Features:

  • Light,Thin design

    5.7kg weight, 2.5mm thickness, match various requirements for low-load projects

  • Ultra Flexible

    Ultra-thin silicon wafers with advanced organic polymer encapsulation materials, minimum bending radius reach 0.30zm,fit all kinds of curved surface perfectly

  • High Efficiency And Reliability

    Busbar-free design increases cell conversion efficiency,more power output can be achieved at low irradiance conditions

  • Customizable

    Customized design for different scenarios

  • Convenient Installation

    Easy installation and convenient transportation with lower cost

  • Lead-free

    Eco-friendly PV design achieves lead-free MWT module without soldering materials


Solar panel production process:


Packing & Delivery:


Application:


Company Profile:

SUNKEAN is a fast-growing solar company ,as well as a turnkey solution provider in China. Products cover Mono perc solar panel,house solar power system, PV connectors, 100 watt solar panel, photovoltaic inverter etc solar products .

SUNKEAN is committed to providing the best solutions for users, installers, investors and all stakeholders. We always take the responsibility on customer’s demands. We make our effort for innovations and breakthroughs.


If you are an end users , we can offer more detail information to you.Please, if you have any questions or concerns about shipping time and delivery, you can ask our professional products consultant.


Send A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related products
430W flexible solar panel
Industrial 430W light weight and flexible solar panel
430W flexible solar panel ultra-light、fast-installation、aesthetic and durable.
IV Grounding  Cable PVC InsulationPSE certified
IV Grounding Cable 3.5mm² PSE Standard PVC Insulation Japanese Certification Cable
IV Grounding Cable 3.5mm² PSE Standard PVC Insulation Japanese Certification Cable is used for wiring of general electrical structures or devices of 600V or lower.
Solar Components grounding clips
Solar Components Mounting System Stainless Steel Grounding Clip
The SUNKEAN lightning protection grounding clip is a simple lightning protection grounding component that pierces the metal oxide surface on the photovoltaic module frame and the photovoltaic rail or purlin to realize the electrostatic conduction on the solar module frame and the installation rail or purlin.
4 Core10 AWG TC-ER AC Cable
TC-ER AC Cable 4 Core 10 AWG Cable Cul Certification Direct Burial Wire
TC-ER AC Cable 4 Core 10 AWG Cable Cul Certification Direct Burial Wire is suitable for power, lighting, control, and signal circuits, mostly used on cable trays or in cable slots, and outdoor places supported by slings. It can also be used in wind power generation, installed in the wind turbine, through the cable bridge, or pipe laying. The advantages of TC-ER AC Cable 4 Core 10 AWG Cable Cul Certification Direct Burial Wire are oil, water, sunlight, and extrusion resistance. At the same time, it is also rated for direct burial and is highly flame-retardant FT4.
Powder coated wire mesh fence
Powder coated wire mesh fencing panels for solar power station
We produce Powder coated wire mesh fence which used for the ground solar power station.
600V 200mm²  CVT Solar Cable Bare copper
CVT 600V Bare copper Solar Cable 200mm² Nominal cross-section
CVT 600VBare copperSolar Cable 200mm²Nominal cross-sectionis Electrical components of solar power systems It is often used to connect electrical parts. Especially severe outdoors Apply to environment.
4 Core18 AWG TC-ER AC Cable
TC-ER AC Cable 4 Core 18 AWG Cable Cul Certification Direct Burial Wire
TC-ER AC Cable 4 Core 18 AWG Cable Cul Certification Direct Burial Wire is suitable for power, lighting, control, and signal circuits, mostly used on cable trays or in cable slots, and outdoor places supported by slings. It can also be used in wind power generation, installed in the wind turbine, through the cable bridge, or pipe laying. The advantages of TC-ER AC Cable 4 Core 18AWG Cable Cul Certification Direct Burial Wire are oil, water, sunlight, and extrusion resistance. At the same time, it is also rated for direct burial and is highly flame-retardant FT4.
EN 50618 H1Z2Z2-K 25mm Twin Core Solar Cable
EN 50618 H1Z2Z2-K 25mm² Twin Core Solar Cable SUNKEAN PV TUV Rhein Certified Cable
SUNKEAN EN 50618 H1Z2Z2-K 25mm² Twin Core Solar Cable TUV Rhein Certified Cable is anti-ultraviolet, anti-ozone, anti-crystallization, and high-temperature resistance, and the material will not melt or flow. It has TUV Rhein certification. SUNKEAN is a leading manufacturer of Twin Core Solar Cables. With more than 13 years' of experience in the field of solar cable. Quality Guaranteed!
 2kV 4/0AWG RPVU90 PV Wire copper dual layer
RPVU90 2kV PV Wire 4/0AWG with copper, dual layer
RPVU90 2kV PV Wire 4/0AWG with copper, dual layer This cable is widely used in photovoltaic power generation and solar systems, connecting solar modules and electrical components. It is suitable for outdoor extreme environments.
H05V-K Flexible Grounding Cable
H05V-K 0.5mm² 300/500V Grounding Cable Flexible Cable Copper Cable PVC Insulation Power Cable
H05V-K is suitable for rated voltages of 300/500V and is a 70°C PVC insulated flexible conductor. Suitable for internal wiring in electric cabinets, switchboards, motors and other electric equipment. Its advantages include easy peeling and cutting, good flexibility, high concentricity, high flame retardancy.
10mm Cable TUV 2PfG 1169 PV1-F
TÜV 2PfG/1169 PV1-F 10mm² Single Core Solar Cable
These cables provide the means to interconnect between photovoltaic(PV) panels and from panels to the inverter.
410 Watt MBB Solar Mono Panel
Mono 410W 182mm Half Cell MBB high efficiency Solar panel
Monocrystalline solar panel 410w 410W 182 MBB solar module for pv panel system.
UL3666 battery wire
3000V XLPE Cable UL3817 battery wire for energy storage system
UL3817 energy storage cables accord UL758 standard, XLPE insulation, and passed UL VW-1 flame test.
1000/2000V UL 4703 PV wire
UL4703 PV wire 1000 or 2000V with bare copper
This 1000V or 2000V PV wire is UL4703 certified and RoHS compliant, and can be used universally used in solar plants.
The Universal Roof Mounting system
Tile roof Mounting system
Roof supports can be used for traditional profile bricks, flat bricks and slate bricks.
1 Core25mm²  NYY-J PV Cable
NYY-J Solar Cable 1 Core 25mm² Direct Burial Wire
NYY-J Solar Cable 1 Core 25mm² Direct Burial Wire is suitable for power and control cable for fixed installation in the following applications: direct burial and building installation, fixed installation with various applications.

click here to leave a message

Send A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

products

about

Contact